5 Repairs To Upvc Windows Myths You Should Stay Clear Of

Repairs to uPVC Windows

uPVC windows are a great option for modern homes. They are easy to maintain, durable and long-lasting. In contrast to aluminium and timber, they don't corrosion or rot.

It is crucial to wash and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it could cause a large deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they generally fit into frames of the past easily. If you have double-paned windows which are joined by internal beading, it will be difficult to remove and replace the old panes. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.

If you're planning to try to remove the window panes yourself it is crucial to wear appropriate safety gear such as gloves that are thick and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor, where they could be trampled.

Once the glass has been removed from the window, it's best to cover the gap with packaging tape or duct tape to stop drafts and water from entering the home until a professional comes out and repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the gap is particularly large, you might want to consider using the security door with an integrated window, as it will provide the best of both worlds.

2. Sagging

uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. However, over window repair near me are susceptible to a range of issues like sagging. A sagging window can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to lose its shape, it is important to act swiftly to prevent the problem from getting worse.

To fix a sagging window you can try to reposition the hinges. To do this, you'll have to open the window so that you can get to the frame. After that, using an screwdriver, remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after having relocated your hinges. If you are happy with the size of the window, tighten the screws to secure them in place.

If you can't reposition the hinges, you might need to replace the seal. Over time rubber seals can lose their elasticity and dry out which causes them to loosen. If this happens, it's essential to replace the seal as soon as you can to ensure that your uPVC windows are watertight and safe from drafts.

uPVC handles may also loosen up. The majority of the time this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has been worn out. It's relatively easy to repair a loose uPVC handle. You'll first need to close the window and then perform an initial fitting. The corner joints of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.

3. Water Leaks

If you awake to damp floors and mouldy walls each time it rains it is important that you take action. Water leaks from windows are not just a cause for destruction of your home's structure but also undermine your efforts to regulate the temperature in your home. The most common cause for leaking uPVC windows is that the sealant surrounding the frame is either damaged or missing.

This is a simple fix that can be accomplished by anyone who is a DIYer with the skills. Depending on how serious the issue is, the old caulking might need to be removed. It is important to remember that when it comes to uPVC window repairs you should not be tempted to apply too much caulk in order to make the area harder to clean and can reduce the efficiency of your energy.

It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed properly so that it drains away from the window. In more serious cases you might need to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.

If the leakage occurs between the double-glazed window, it is more likely that the issue is more with the seal rather than the frame. It is also possible to be repaired by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.

4. Faulty Hinges





Hinges may be to blame if your uPVC window is difficult to open or if it opens in the breeze. Any competent DIYer can replace the hinges in a matter of minutes.

Like all mechanical parts hinges are prone to wear out over time. It is very easy to change a window hinge but it's much easier if someone else helps you hold the frame.

It is also worth checking that the uPVC hinges are opening and closed in the correct direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should open.

The problem with the hinges on windows can be caused by incorrectly opening the window in a certain way or by improper installation in the factory. Sending us a picture through our website can often resolve the problem. We are always happy to offer suggestions.

Regular lubrication of the hinges is essential. This can be done by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to operate and close more easily. It also helps prevent corrosion and reduce the possibility of sticking. Ideally, you should do this once a year. WD40 or other solvent-based oils should not be used as they can cause damage to your uPVC windows.

5. Draughts

Draughts in upvc windows can be caused by a variety of different factors. The hinges can also become unbalanced due to wear, causing gaps where the sash and frame meet. These can be easily repaired by giving them a good clean, but if they are beyond repair it might be necessary to have them realigned or replaced. In addition, the interlock could be disaligned. It is located on the hinge's side, and could require to be cleaned. In certain instances, it may be necessary to replace these.

The next common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time, and let air escape through the gaps. Replacing these with high-quality weatherstripping will help to prevent draughts. Replace the windows made of Upvc with low-emissivity lenses. This will help to regulate indoor temperatures and lessen the risk of draughts.

One of the most effective ways to cut down on draughts is by using an draught excluder. These are typically fabric tubes filled with some sort of filler and can be put on top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!

With a little maintenance and repair windows made of upvc will continue to provide a great level of insulation and security for your home. It is crucial to keep in mind that all windows eventually become worn out, and it is more cost-effective to replace them than to repair them. If you have any problems with your upvc window, it's best to consult a professional immediately.